BF-15: Advanced Variable Frequency Generator
| Features: - Frequency Range: 0.01Hz~15MHz
- Maximum Frequency Resolution: 10mHz
- Frequency Accuracy: 0.02% ±5 Count
- Dual Display Indicates Frequency & Amplitude
- Built-in 6 Digit Counter with INT/EXT Function up to 150Mhz/High Resolution
- Output Waveforms: Sine, Square, Triangle, Ramp, Pulse, AM, FM, Sweep, Trigger, and Gate or Burst
- VCF for 100:1 EXT Frequency Control
- INT/EXT Frequency Modulation
- GCV Output for Synchronization
- Variable DC Offset Control
- SYNC Output
- LIN/LOG Sweep Mode
- Output Overload Protection
- RS-232 Standard Interface
- Multiple (8) Channel Outputs
|
|
BF-15: Advanced Variable Frequency Generator
|
|
|
| Main | | Output Waveforms | Sine, Square, Triangle, ±Ramp, Pulse, AM, FM, Sweep, Trigger, Gate or Burst | | Frequency Range | 10mHz~15MHz in 8 Frequency Ranges (auto-switch) | | Frequency Resolution | 15MHz~150kHz (100Hz)
1.5MHz~15kHz (10Hz)
150kHz~1.5kHz (1 Hz)
15kHz~150Hz (0.1Hz)
1.5kHz~15Hz (10MHz)
150Hz~1.5Hz (10mHz)
15Hz~0.15Hz(10mHz)
1.5Hz~0.01Hz (10mHz) | | Frequency Accuracy | 0.02% ±5 Count | | Output Impedance | 50Ω ±10% | | Amplitude Range | 10.00V~0.01V (into 50 ohms) 4 amplitude range;
|Vac peak| + |Vdc| = 5V
Resolution: 10mV (10.00V~0.01V) | | Amplitude Accuracy | ≤3% ±5 count at 10Hz~1MHz ≤10% ±5 count at 1MHz~1.5MHz | | Amplitude Unit | Vpp, Vrms, dBm | | DC Offset | -5V~5V (into 50Ω); Resolution 10mV | | DC Offset Accuracy | ≤3% ±3 count at Amplitude Min | | Duty Control | 80%:20%:80% ~ 1MHz; Resolution 1% | | Duty Accuracy | ≤1% ~ 1MHz at 50% Duty | | Display | Dual Display for Frequency 6 digits and Amplitude 4 digits | | Sine Wave | | Distortion | ≤0.5%(-46dBc) From 10Hz~150kHz; ≤-30dBc to 15MHz;
(Spec applied from 1Vpp to 10Vpp) | | Triangle Wave | | Linearity Error | <1% of full scale output at 100Hz | | Square Wave | | Asymmetry | ±1% of period + 3ns | | Rise or Fall Time | <18nSec | | SYNC Output | | Impedence | 50Ω ±10% | | Level | >1Vp-p open circuit | | Modulation Characteristics | | Types | AM, FM, Trigger (int/ext), Gate or Burst (implement by trigger type) | | Waveform | Sine, Square, Triangle, Ramp, or Variable Symmetry Pulse | | Rate Frequency Range | 10mHz~10kHz in 3 frequency ranges (auto switch) | | Rate Frequency Accuracy | ±1 Count | | Rate Frequency Resolution | 10.0kHz~0.1kHz (100Hz)
99Hz~1Hz (1Hz)
0.99Hz~0.01Hz (0.01Hz) | | Symmetry | 90%:10%:90%; Resolution 1% | | Symmetry Accuracy | ±1 count (≤ ±1%) | | Output Level | ≥1Vpp into 10kΩ load | | Sine Wave Distortion | ≤1% from 10Hz to 10kHz | | Amplitude Modulation | | Depth | 0~100% | | Modulation Frequency Rate | 0.01Hz~10kHz in 3 frequency range (auto switch) | | Carries -3dM Bandwidth | <100Hz to >MHz | | External Sensitivity | ≤ 10Vpp for 100% modulation | | Frequency Modulation | | Deviation | 0~±15% | | Modulation Frequency Rate | 0.01Hz~10kHz(INT) DC~1MHz(EXT) | | External Sensitivity | ≤ 5Vpp for 15% deviation | | Sweep Characteristics | | Sweep Range | 15MHz~150kHz
1.5MHz~15kHz
15.0kHz~1.5kHz
15kHz~150Hz
1.5kHz~15Hz
150Hz~1.5Hz
15Hz~0.15Hz
1.5Hz~0.01Hz | | Width | ≥100:1 (In same frequency range) | | Rate | 0.01Hz~10kHz | | Symmetry Control | 90:10:90; Resolution: 1% | | Mode | Linear/Log Sweep | | Sweep Output | 0~≥-5Vp-p into 10kΩ | | Trigger Characteristics | | Start/Stop Phase Range | 90°~260° | | Rate | 0.01Hz~10kHz | | Frequency Range | 0.1Hz~1MHz (Useful ~ 10MHz) | | Ext Trig Frequency Range | DC ~ 1MHz, TTL compatible input level | | Gate or Burst | Implement by Trigger setting | | VCF (Voltage Controlled Frequency) | | Range | 100:1 (0~10V±1V) | | Input Linearity | <0.5% to 1MHz, <5% to 10MHz | | Input Impedance | 10kΩ | | GVC Output (Generator Controlled Voltage) | | | To set the voltage between 0.2v to 2v as per different frequency in same frequency range | | Frequency Counter | | INT/EXT | Switch Selector | | Range | 5Hz~150MHz EXT | | Accuracy | Timebase Accuracy ±1 count | | Time Base | ±20ppm(23°±5°C) after 30 minutes warm up | | Resolution | The maximum resolution is 100nHz for 1Hz and 1Hz for 100MHz | | Input Impedance | 1MΩ//150pF | | Sensitivity | ≤35mVrms(5~100MHz);
≤45mVrms(100MHz~150MHz) |
Order by Phone or Online
We find that many customers would prefer to call us for help in selecting the best products
to suit their needs. Please feel free to contact us by phone or email or use our easy Online Order Form.
| Phone: | 289-389-9773 |
| Toll Free: | 1-800-488-2032
from Canada, US and Territories |
| E-mail: | info@biophysica.com |
Product Profile
|
| Memory Save/Recall | 10 Sets of front panel setting memories | | Interface | RS-232C | | Power Source | AC 115V/230V±15%, 50/60Hz | | Accessories | Power cord
Instruction manual
GTL-101 | | Dimensions & Weight | 290(W) 142(H) 460(D) mm, Approx. 5 kg |
|
